River Cast Deep Cast Resin - Health Of Mind Art
River Cast Deep Cast Resin - Health Of Mind Art
HEALTH OF MIND RIVER CAST is a clear casting epoxy deep cast resin system designed for deep casting applications, including river tables, casting, and embedding. RIVER CAST is a low viscosity, low exotherm epoxy deep cast resin with superior air release and minimal shrinkage. River Cast can be poured up to 300mm deep with the right temps . River cast is a premium formula that’s been designed for longevity. Our epoxy systems are designed for long term success . They will not Yellow quickly like cheap epoxies .
River Cast has been designed to be the most user friendly deep cast resin on the market.
Colour: Clear liquid Pot life: ~3 hours
Cured time: 48 – 72 hours (volume and temperature dependent)
Cure to maximum strength: 7 days
Resin Use: Deep Cast Resin
Mixed viscosity: Low Viscosity (Water like)
Shore D hardness (at 20 Degrees C): 80-85
Colour Stability: Low yellowing (will darken on UV exposure)
Usage Advice:
Cover working area with cardboard or plastic. The surface to be coated should be dry and free of contaminants.
For best results, pour at temperatures between 15-20 Degrees C (volume and depth dependent) and below 70% humidity. Like most deep cast resins. Air bubbles may form on the surface. Air bubble release is greatly enhanced by use of a heat gun or gas torch.
Care should be taken to avoid over heating in one spot – sweep the heat gun continuously across the surface for a few seconds.
Please Note: Deep Cast Resins are environment dependant the larger the pour the more attention you need to pay to your environment . Temperature is critical and therefore environment control is highly recommended. For optimal results, do not pour large volumes outside of the recommended temperature and humidity ranges. If you can not pour under ideal conditions, smaller layered pours are recommended. For large pours please contact us for advice and strategy
Once material has cured, it can be sanded or mechanically processed as required.
This deep cast resin can be tinted with HEALTH OF MIND pigments to achieve a vibrant finish.
Mixing Volume
The cure speed of this product depends greatly upon the volume of product mixed. This product is specifically designed for large volume mixes. Thin casts or applications as a coating will exhibit a longer cure time.
Shelf Life
12mths @ 25 degrees C unopened
Max Depth Per Pour
This deep cast resin is a slow speed casting system specifically designed for a low exotherm for deep pours (50-100mm thick in a single pour) however pours from 10-100mm are possible conditions dependant , curing times based on overall volumes and conditions will fluctuate
Materials
Materials
Shipping & Returns
Shipping & Returns
Free Shipping with every order over $100 + Free 30 Day Returns